All categories
Our partners
Technical information
Polyurethane adhesive for the installation of windshield SOTRO Auto Glass GLUE in a tube 310 ml
Technical information
SOTRO Auto Glass Glue is a one-component polyurethane adhesive for car glass installation.
Available types::
T063001 - black
Typical use: direct windshield bonding
Specifications. SOTRO Auto Glass Glue is a one component, high viscosity, moisture curing polyurethane adhesive, primarily used for automotive direct glazing with and without airbag. Cures for a longer time, allowing application on large bus and truck windshields.
Application.The surfaces to be bonded must be dry, free from grease, dust and free of any contaminants that could interfere with the bonding. Clean with methyl ethyl ketone (MEK) or acetone. Let dry after degreasing. Puncture the cartridge and cut the nozzle according to the required extrusion diameter, remove the metal base and extrude with a hand or air gun. Place the glass covered with glue on the car body and press it until the glue begins to harden (i.e. no more than 30 minutes after application). Avoid contact with MS resins, PU hybrid or silicone sealants and alcohols or ammonia during curing.
Storage. Store tightly closed at temperatures between 5⁰C and + 25⁰C.
The information contained in this technical inspection is based on current scientific and technical knowledge and, therefore, does not exempt the customer from checking the suitability of our products for use and as intended.