All categories
Our partners
Technical information
SOTRO Fiber Glass Putty P60 Fiberglass Putty
Technical information
SOTRO Fiber Glass putty P60 is a glass fiber putty. Easy to work and sand even with fine sanding paper (P120-P320).
Available types::
T016005 - 0.6 kg
T016010 - 1.8 kg
Specifications. Can be used directly under filler primer. Fiber Glass is designed for use on steel, aluminum and glass fiber reinforced plastics. Hand / machine dry (P120-P320). Easy to work even on homogeneous surfaces even with thick layers. Does not clog sanding paper and has very good adhesion to the surface. Can be used to reinforce damaged surfaces.
Application: Before application, clean and degrease the surface. The working life of the mixture is 3 - 5 minutes at a temperature of 20 ° C.
Attention! Using too much hardener can cause discoloration of the topcoat. It is not recommended to use a filler below 15 ° C. Store in closed containers in a dry and well-ventilated place.
The information contained in this technical inspection is based on current scientific and technical knowledge and, therefore, does not exempt the customer from checking the suitability of our products for use and as intended.