All categories
Our partners
Technical information
Putty for plastics SOTRO Multi Plastic Putty P80
Technical information
SOTRO Multi Plastic putty P80 is a highly flexible, multi-functional putty specially designed for use on plastic parts including polypropylene.
Available types::
T018005 - 0.6 kg
T018010 - 1.8 kg
Specifications. Highly flexible multi-functional putty, specially designed for use on plastic parts, including polypropylene. Ease of use and simulation. It can be used as a filler and as a fine filler. Provides pore-free coverage, easy to sand (P180-320). Also has good adhesion to metal surfaces including steel, galvanized steel and aluminum, as well as polyester surfaces.
Application: Before application, clean and degrease the surface. The working life of the mixture is 3 - 5 minutes at a temperature of 20 ° C.
Attention!Using too much hardener can cause discoloration of the topcoat. It is not recommended to use a filler below 15 ° C. Store in closed containers in a dry and well-ventilated place.
The information contained in this technical inspection is based on current scientific and technical knowledge and, therefore, does not exempt the customer from checking the suitability of our products for use and as intended.