P40 Aluminum - with aluminum powder

Putty with aluminum powder SOTRO Aluminum Putty P40

Technical information

SOTRO Aluminum putty P40 is a two-component polyester putty. Fine treatment of the body with aluminum filler.

Characteristics: It has good forming properties in thin layers and is easy to sand with fine sanding paper (P120-P320), which excludes transitions between the putty and the surface to be repaired.
High temperature and mechanical resistance. Suitable for filling dents and other defects in steel exposed to high temperatures and mechanical stress. Does not clog sanding paper. Very good adhesion to the work surface. Can be used to reinforce damaged surfaces. It is not necessary to use a finishing putty after P40 putty.

Application: Before application, clean and degrease the surface. The working life of the mixture is 3 - 5 minutes at a temperature of 20 ° C.

Attention!Using too much hardener may discolor the top coat. It is not recommended to use a putty below 15 ° C. Store in closed containers in a dry and well-ventilated place.